????
Your IP : 3.16.218.216
| Current Path : /usr/local/bin/ |
|
|
| Current File : //usr/local/bin/ea_convert_php_ini |
#!/usr/local/cpanel/3rdparty/bin/perl
# cpanel - ea_convert_php_ini Copyright(c) 2016 cPanel, Inc.
# All rights Reserved.
# copyright@cpanel.net http://cpanel.net
# This code is subject to the cPanel license. Unauthorized copying is prohibited
# !!! This should only be run during migration !!!
#
# Description
# Updates each user's 'php.ini' file so it's compatible with EA4.
#
# Conditions (ALL must be met for this script to run)
# 1. This is being run by the migrate_ea3_to_ea4 script.
# 2. The system default PHP version is assigned to the mod_suphp
# Apache handler.
# 3. User is assigned to the system default PHP version.
# 4. The user has defined the 'suPHP_ConfigPath' setting within
# an .htaccess file in the docroot of a vhost.
#
# Design
# You'll notice 4 packages in this script. These are separate
# because:
# 1. It's overkill right now to create a whole new RPM package
# which would contain the code we need to correctly parse
# PHP ini files, get it into cpanel & whm, etc.
# 2. This used to be broken up into 2 scripts and designed to
# allow future cmd-line execution. However, it was too slow.
# In an effort to speed it up (1.5 hrs to 5 mins against
# 10k accounts), the files were merged (/bin/cat a b > c) and
# it was easier to combine the files and keep the packages
# intact.
#
# The 4 packages in here are as follows:
# - Parse::PHP::Ini -- logic to parse/merge/render PHP ini files
# - ea_convert_php_ini_file -- logic to convert a single php ini file
# - ea_convert_php_ini_system -- logic to convert an entire
# cpanel system
# - main -- main script interface
#
# TODO:
# 1. Allow user to manually run this script to convert the system at-will.
# 2. Allow script to convert a vhost's ini files assigned to a php version
# other than the system default.
# 3. Allow script to run if the php version is assigned to a non-suphp handler.
# 4. Allow user to convert an individual ini file.
#
# !!! This should only be run during migration !!!
package Parse::PHP::Ini;
use strict;
use warnings;
use Cpanel::Fcntl ();
use Cpanel::ArrayFunc ();
use Time::HiRes qw( CLOCK_REALTIME );
# the special name we apply to things we find at file-scope within a php ini file. this
# name should not be a valid section name
our $ROOT_NAME = '!_ROOT_!';
sub new {
my $class = shift;
my %args = @_;
require Tree::DAG_Node; # this wasn't available on cpanel 11.54 and older
return bless( \%args, $class );
}
# Accessor method for profiling the parser
# NOTE: Would be nice to have some sort of Aspect-oriented api for this
sub add_timestamp {
my $self = shift;
return 1 unless $self->{debug};
my $label = shift;
my $ts = Time::HiRes::clock_gettime();
push @{ $self->{timestamp} }, { label => $label, ts => $ts };
return 1;
}
# Get a list of profiling timestamps
sub get_timestamps {
my $self = shift;
return ( defined $self->{timestamp} ? @{ $self->{timestamp} } : [] );
}
sub parse_init {
my $self = shift;
my %args = @_;
my %struct;
if ( $args{path} ) {
require Tie::File;
open( my $fh, '<', $args{path} ) or die Cpanel::Exception::create( 'IO::FileOpenError', { path => $args{path}, error => $!, mode => '<' } );
my @content;
my $tie = tie @content, 'Tie::File', $fh, recsep => "\n", mode => Cpanel::Fcntl::or_flags(qw(O_RDONLY));
$struct{fh} = $fh;
$struct{content} = \@content;
}
elsif ( $args{str} ) {
my @content = split( /\n/, ${ $args{str} } );
$struct{content} = \@content;
}
else {
die Cpanel::Exception::create( 'MissingParameter', { name => 'path' } ) if ( !defined $args{path} && !defined $args{str} );
}
return \%struct;
}
sub parse_clean {
my ( $self, $struct ) = @_;
if ( $struct->{fh} ) {
untie $struct->{content};
delete $struct->{content};
close $struct->{fh};
delete $struct->{fh};
}
return 1;
}
# Returns the current PHP ini section.
#
# Parsing a PHP ini file ensures that everything it parses is container within
# a section (e.g. [curl]). The exception being, that we have a special section
# called, $ROOT_NAME. This section often contains comments and blank lines.
#
# Since everything must be in a section, the "mother" must always be of
# type 'section'.
# TODO: add checks to guarantee $node and $attr passed in
sub get_current_section {
my ( $self, $node ) = @_;
my $type = $self->get_node_type($node);
return ( $type eq 'section' ? $node : $node->mother() );
}
# Finds a matching php ini section (e.g. [curl])
# TODO: add checks to guarantee $tree and $match passed in
sub get_matching_section {
my ( $self, $tree, $match ) = @_;
# $match matches the value attribute (lc of section name), not what's displayed in ini file
my $section;
$self->add_timestamp("Start: get_matching_section( $match )");
$match = lc $match;
$tree->walk_down(
{
_depth => scalar $tree->ancestors,
callback => sub {
my ( $node, $opt ) = @_;
return 1 if ( defined $opt->{_depth} && $opt->{_depth} > 1 ); # all settings are inside sections, which are depth 1 (or undef for root)
my $type = $self->get_node_type($node);
my $attr = $node->attribute();
my $ret = 1;
if ( $type eq 'section' && $attr->{value} eq $match ) {
$section = $node;
$ret = 0; # stop traversing, we found the section
}
return $ret;
}
}
);
$self->add_timestamp("End: get_matching_section( $match )");
return $section;
}
# Find a setting within a php ini section, if any
# TODO: add checks to guarantee $section, $key, and $value passed in
sub get_matching_setting {
my ( $self, $section, $key, $value ) = @_;
my $setting;
$self->add_timestamp("Start: get_matching_setting( section=$section setting=$key )");
$key = lc $key;
# For the most part, when PHP finds the same setting, it knows to
# override the value that it saw earlier. However, the exception
# to this is when it finds 'extension' and 'zend_extension'. These
# can be duplicated all over.
$section->walk_down(
{
_depth => scalar $section->ancestors,
callback => sub {
my $node = shift;
my $type = $self->get_node_type($node);
my $attr = $node->attribute();
return 1 unless $type eq 'setting';
my $ret = 1;
if ( $key eq 'extension' || $key eq 'zend_extension' ) {
if ( $value eq $attr->{value} ) {
$setting = $node;
$ret = 0;
}
}
else {
if ( $key eq $attr->{key} ) {
$setting = $node;
$ret = 0;
}
}
return $ret;
}
}
);
$self->add_timestamp("End: get_matching_setting( section=$section setting=$key )");
return $setting;
}
sub is_root_node {
my ( $self, $node ) = @_;
return ( $node->name() eq $ROOT_NAME ? 1 : 0 );
}
sub make_root_node {
my $self = shift;
return $self->make_section_node( $ROOT_NAME, 0 );
}
# TODO: add checks to guarantee $name and $line passed in
sub make_section_node {
my $self = shift;
my ( $name, $line ) = @_;
$self->add_timestamp("Start: make_section_node( name=$name )");
$line ||= 0;
my $node = Tree::DAG_Node->new();
$node->name($name);
$node->attribute( { type => 'section', value => lc $name, line => $line } );
$self->add_timestamp("End: make_section_node( name=$name )");
return $node;
}
# TODO: add checks to guarantee $value and $line passed in
sub make_filler_node {
my $self = shift;
my ( $value, $line ) = @_;
$self->add_timestamp("Start: make_filler_node()");
$line ||= 0;
my $node = Tree::DAG_Node->new();
$node->name('filler');
$node->attribute( { type => 'filler', value => $value, line => $line } );
$self->add_timestamp("End: make_filler_node()");
return $node;
}
# TODO: add checks to guarantee $key, $value, and $line passed in
sub make_setting_node {
my $self = shift;
my ( $key, $value, $line ) = @_;
$line ||= 0;
my $node = Tree::DAG_Node->new();
$node->name($key);
$node->attribute( { type => 'setting', key => lc $key, value => $value, line => $line } );
return $node;
}
# TODO: validate $in is a Tree::DAG_Node type
sub dup_node {
my ( $self, $in ) = @_;
my $type = $self->get_node_type($in);
my $attr = $in->attribute();
my $out;
$self->add_timestamp("Start: dup_node( type=$type )");
if ( $type eq 'setting' ) {
$out = $self->make_setting_node( $in->name(), $attr->{value}, $attr->{line} );
}
elsif ( $type eq 'section' ) {
$out = $self->make_section_node( $in->name(), $attr->{line} );
}
elsif ( $type eq 'filler' ) {
$out = $self->make_filler_node( $attr->{value}, $attr->{line} );
}
else {
die Cpanel::Exception::create( 'InvalidParameter', "Programmer Error: Request node duplicate on unknown type: $type" );
}
$self->add_timestamp("End: dup_node( type=$type )");
return $out;
}
# TODO: add checks to guarantee $node and $attr passed in
# TODO: add check to ensure $attr is a hash ref that contains all setting values
# NOTE: We make a copy of %$attr for tinkering safety
sub update_node {
my $self = shift;
my ( $node, $attr ) = @_;
my %copy = %$attr;
$node->attribute( \%copy );
return 1;
}
# TODO: validate $node existence and type
sub get_node_type {
my ( $self, $node ) = @_;
my $attr = $node->attribute();
return $attr->{type};
}
# TODO: validate $node existence, Tree::DAG_Node type, and is a 'setting' type
# TODO: validate each @exclude entry ('key' and 'value') is a regex (qr//)
# TODO: generalize this method to is_excluded_node() (YAGNI?)
sub is_excluded_setting {
my $self = shift;
my $node = shift;
my @exclude = @_;
my $excluded = 0;
my $attr = $node->attribute();
$self->add_timestamp("Start: is_excluded_setting()");
# Exclusion criteria:
# 1. if only 'key' regex supplied, then the key must match
# 2. if only 'value' regex supplied, then only the value must match
# 3. if both 'key' and 'value' supplied, then both regexes must match
for my $href (@exclude) {
my @and;
push @and, ( $href->{key} && $attr->{key} =~ $href->{key} ) ? 1 : 0;
push @and, ( $href->{value} && $attr->{value} =~ $href->{value} ) ? 1 : 0;
# the sum of the votes must be equal to the number of exclusions compared against
if ( Cpanel::ArrayFunc::sum(@and) == scalar keys %$href ) {
$excluded = 1;
last;
}
}
$self->add_timestamp("End: is_excluded_setting()");
return $excluded;
}
# Parses a PHP ini file and returns the Tree
sub parse {
my $self = shift;
my %args = @_;
$self->add_timestamp("Start: parse()");
my $struct = $self->parse_init(%args);
# initialize parsing tree with our special ROOT node
my $root = $self->make_root_node();
my %section_cache;
# this is used so that we can easily access the previously inserted
# node (or perhaps use it to determine which ini section we're in)
my $current_node = $root;
# line count
my $count = 0;
# parse the ini file
for my $line ( @{ $struct->{content} } ) {
$count++;
chomp $line;
if ( $line =~ /^\s*\[(.+?(?=\]))\]/ ) { # e.g. [curl]
my $name = "$1";
my $section = $self->get_matching_section( $root, $name );
# never seen this section before, create and add it
unless ($section) {
$section = _get_cache( \%section_cache, $name );
$section = $self->make_section_node( $name, $count ) unless $section;
$root->add_daughter($section);
}
$current_node = $section;
_set_cache( \%section_cache, $name, $section );
}
elsif ( $line =~ /^\s*([\/\-\w\.]+)\s*=\s*(.*)$/ ) { # e.g. "allow_url_fopen = Off" (NOTE: You can have empty values)
my ( $key, $value ) = ( "$1", "$2" );
my $section = $self->get_current_section($current_node);
# don't add settings to the root node, they must go into the global PHP section
if ( $self->is_root_node($section) ) {
$section = $self->get_matching_section( $root, 'PHP' );
if ( !$section ) {
$section = $self->make_section_node( 'PHP', $count );
$root->add_daughter($section);
}
}
# add/update the setting in this section
my $setting = $self->get_matching_setting( $section, $key, $value );
if ($setting) {
my $tmp = $self->make_setting_node( $key, $value, $count );
my $attr = $tmp->attribute();
$self->update_node( $setting, $attr );
}
else {
$setting = $self->make_setting_node( $key, $value, $count );
$section->add_daughter($setting);
}
$current_node = $setting;
}
elsif ( $line =~ /^(\s*(?:;.*)?)$/ ) { # comment or blank line
my $value = "$1\n";
my $attr = $current_node->attribute();
if ( $attr->{type} eq 'filler' ) {
$attr->{value} .= $value; # just append to previous filler, instead of creating a new one for each line
}
else {
my $filler = $self->make_filler_node( $value, $count );
my $section = $self->get_current_section($current_node);
$section->add_daughter($filler);
$current_node = $filler;
}
}
else { # if we get here, we're not taking into account all possible php ini file formats
warn "Unable to parse line $count: $line";
}
}
$self->parse_clean($struct);
$self->add_timestamp("End: parse()");
return $root;
}
sub _get_cache {
my ( $cache, $key ) = @_;
$key = lc $key;
return $cache->{$key};
}
sub _set_cache {
my ( $cache, $key, $val ) = @_;
$key = lc $key;
$cache->{$key} = $val;
return 1;
}
# Creates a new tree that contains the properties of both. If there's
# a conflict, then the "right" tree's value wins.
sub merge {
my $self = shift;
my ( $ltree, $rtree ) = @_;
my %args = @_;
my $exclude = $args{exclude} || [];
die Cpanel::Exception::create( 'MissingParameter', { name => 'ltree' } ) unless $ltree;
die Cpanel::Exception::create( 'MissingParameter', { name => 'rtree' } ) unless $rtree;
die Cpanel::Exception::create( 'InvalidParameter', "The “[_1]” parameter must be a “[_2]” object.", [ 'ltree', 'Tree::DAG_Node' ] ) unless ( ref $ltree eq 'Tree::DAG_Node' );
die Cpanel::Exception::create( 'InvalidParameter', "The “[_1]” parameter must be a “[_2]” object.", [ 'rtree', 'Tree::DAG_Node' ] ) unless ( ref $rtree eq 'Tree::DAG_Node' );
$self->add_timestamp("Start: merge()");
# start by duplicating the left tree (aka, the merge tree)
my $root = $ltree->copy_tree;
my %section_cache;
# now merge the right tree into the merge tree (top down, as opposed to
# bottom up)
$rtree->walk_down(
{
_depth => scalar $rtree->ancestors,
callback => sub {
my $node = shift;
my $name = $node->name();
my $attr = $node->attribute();
my $type = $self->get_node_type($node);
return 1 if $self->is_root_node($node); # the root node is a special container, nothing to merge, move on
return 1 if $type eq 'setting' && $self->is_excluded_setting( $node, @$exclude );
if ( $type eq 'section' ) {
unless ( $self->get_matching_section( $root, $name ) ) {
$root->add_daughter( $self->dup_node($node) ) unless $self->is_root_node($node);
}
}
elsif ( $type eq 'setting' ) {
my $node_section = $self->get_current_section($node);
my $merge_section = _get_cache( \%section_cache, $node_section->name() );
unless ($merge_section) {
$merge_section = $self->get_matching_section( $root, $node_section->name() );
_set_cache( \%section_cache, $node_section->name(), $merge_section );
}
# NOTE: We're reading top-down, so this section should have already been created above
unless ($merge_section) {
die Cpanel::Exception::create( 'InvalidParameter', "Programmer Error: The left merge tree is unable to merge a setting because it's missing section: “[_1]”.", [ $node_section->name() ] );
}
my $setting = $self->get_matching_setting( $merge_section, $name, $attr->{value} );
if ($setting) {
$self->update_node( $setting, $attr );
}
else {
my $dup = $self->dup_node($node);
$merge_section->add_daughter($dup);
}
}
elsif ( $type eq 'filler' ) {
# TODO: We're not going to merge blank lines and comments from the right, into the left.
# Why? if there's duplicate settings found, then the comment would be added at
# the end of the current section, and is going to be a dangle (TM) now -- e.g. not
# next to the setting anymore. Since this would make merging far more
# complex than copying things from "left into right trees", I am leaving this
# alone for now.
}
else {
die Cpanel::Exception::create( 'InvalidParameter', "Programmer Error: The left merge tree contains an invalid note type: “[_1]”.", [$type] );
}
return 1;
}
}
);
$self->add_timestamp("End: merge()");
return $root;
}
# Returns a reference to a string that contains a rendered ini file
sub render {
my ( $self, $tree ) = @_;
my $str = '';
die Cpanel::Exception::create( 'MissingParameter', { name => 'tree' } ) unless $tree;
die Cpanel::Exception::create( 'InvalidParameter', "The “[_1]” parameter must be a “[_2]” object.", [ 'tree', 'Tree::DAG_Node' ] ) unless ( ref $tree eq 'Tree::DAG_Node' );
$self->add_timestamp("Start: render()");
# NOTE: use 'callback' not 'callbackback' to ensure we do a top-down traversal
$tree->walk_down(
{
_depth => scalar $tree->ancestors,
callback => sub {
my $node = shift;
my $type = $self->get_node_type($node);
my $attr = $node->attribute();
if ( $type eq 'section' ) {
$str .= '[' . $node->name() . "]\n" unless $self->is_root_node($node);
}
elsif ( $type eq 'setting' ) {
$str .= $attr->{key} . ' = ' . $attr->{value} . "\n";
}
elsif ( $type eq 'filler' ) {
$str .= $attr->{value};
}
else {
die Cpanel::Exception::create( 'InvalidParameter', "Programmer Error: The tree being rendered contains an invalid node type: “[_1]”.", [$type] );
}
return 1;
}
}
);
$self->add_timestamp("End: render()");
return \$str;
}
package ea_convert_php_ini_file; # This package is used by the suphp conf yum hook script in ea-apache24-config, do not modify it without adjusting that too.
use 5.014; # for /a and /r options
use strict;
use warnings;
use Cwd ();
use Cpanel::Fcntl ();
use Cpanel::Exception ();
use Cpanel::ProgLang::Conf ();
use Cpanel::SysPkgs::SCL ();
our %Cfg;
our %SysIniCache; # store parsed versions of the system ini files to speed up conversion
# Retrieves the root directory of the SCL PHP package. This is specified
# in the scl prefixes directory.
#
# This is determine which Software Collection based PHP package we're converting
# to. If the user specified an explicit hint, then try to use that.
# If we can't figure it out, or the user specified an invalid package, then
# give up and spit out an error.
sub get_scl_rootpath {
my $hint = shift;
usage("ERROR: You must specify a valid PHP package name.") if ( !$hint || $hint =~ /\Q[\w\-]+\E/a );
# This must be the directory where the SCL package is installed
my $path = Cpanel::SysPkgs::SCL::get_scl_prefix($hint);
die Cpanel::Exception::create( 'InvalidParameter', "The “[_1]” package does not exist or does not conform to the [asis,RedHat] [asis,Software Collection] standard.", 'PHP' ) unless $path;
return "$path/root";
}
# Determine the SCL package we want to use for the ea3 -> ea4 conversion
sub guess_scl_package {
my ( $path, $hint ) = @_;
# TODO: Examine the $path of ini to automatically guess which
# PHP package to use (EA-4827). For example, if the
# user specifies an ini file located in /home/joe/public_html,
# then be smart enough to pick the php package assigned
# to the domain that has that as a docroot.
#
# For now, just explicitly use the $hint or system default
my $conf = defined $Cfg{state} ? $Cfg{state} : Cpanel::ProgLang::Conf->new( type => 'php' )->get_conf();
my $package;
if ( defined $hint && defined $conf->{$hint} ) {
$package = $hint;
}
else {
$package = $conf->{default};
}
die Cpanel::Exception::create( 'FeatureNotEnabled', q{“[_1]” is not installed on the system.}, ['PHP'] ) unless $package;
return $package;
}
sub get_php_ini {
my $path = shift;
my $ini;
if ( sysopen( my $fh, $path, Cpanel::Fcntl::or_flags(qw( O_NOFOLLOW O_RDONLY )) ) ) {
binmode $fh, ':utf8';
if ( -f $fh ) {
local $/ = undef;
my $txt = <$fh>;
my $parser = Parse::PHP::Ini->new();
$ini = $parser->parse( str => \$txt );
}
else {
warn "Skipping $path. Not a regular file";
}
close $fh;
}
else {
warn "Skipping $path. Failed to open: $!";
}
return $ini;
}
sub get_phpd_ini {
my $phpd = shift;
my %args = @_;
my $parser = Parse::PHP::Ini->new();
my $cwd = Cwd::getcwd;
my $ini;
chdir $phpd or die Cpanel::Exception::create( 'IO::ChdirError', { error => $!, path => $phpd } );
if ( opendir( my $dh, '.' ) ) {
for my $file ( sort grep { /\.ini$/ } readdir($dh) ) { # sort asciibetically like PHP does
my $entry = get_php_ini($file);
next unless $entry;
$ini = $ini ? $parser->merge( $ini, $entry ) : $entry;
}
closedir $dh;
$ini = $parser->make_root_node() unless $ini; # return empty parse tree if empty dir
}
else {
chdir $cwd;
die Cpanel::Exception::create( 'IO::DirectoryOpenError', { path => $phpd, error => $! } );
}
chdir $cwd or die Cpanel::Exception::create( 'IO::DirectoryOpenError', { path => $cwd, error => $! } );
return $ini;
}
sub get_system_ini {
my $scl_package = shift;
my $scl_root = get_scl_rootpath($scl_package);
my $ini = $SysIniCache{$scl_root};
return $ini if $ini;
# get default system php.ini file, which MUST exist
my $path = "$scl_root/etc/php.ini";
my $sysini = get_php_ini($path);
die "ERROR: Failed to read the system default PHP ini file, $path" unless $sysini;
my $phpd = get_phpd_ini("$scl_root/etc/php.d");
# now merge all of these ini files together in the correct order
my $parser = Parse::PHP::Ini->new();
$ini = $parser->merge( $phpd, $sysini );
$SysIniCache{$scl_root} = $ini;
return $ini;
}
sub get_converted_php_ini {
my ( $path, $scl_package ) = @_;
my $ini = get_system_ini($scl_package);
# get user's ini file, but ignore warnings since it may not exist
my $srcini;
{
local $SIG{__WARN__} = sub { };
$srcini = get_php_ini($path);
}
my @exclude = (
{ key => qr/^extension$/i },
{ key => qr/^zend_extension$/i },
{ key => qr/^extension_dir$/i },
);
my $parser = Parse::PHP::Ini->new();
$ini = $parser->merge( $ini, $srcini, exclude => \@exclude ) if $srcini;
return $ini;
}
sub write_php_ini {
my ( $ini, $path ) = @_;
my $parser = Parse::PHP::Ini->new();
my $txtref = $parser->render($ini);
die "ERROR: An existing ini file already exists with that name.\n Remove the file or use the -f option\n" if ( -e $path && !$Cfg{force} );
# If it exists as a symlink, remove the symlink so we can write it to the proper location
unlink $path if ( -l $path );
if ( sysopen( my $fh, $path, Cpanel::Fcntl::or_flags(qw( O_NOFOLLOW O_WRONLY O_TRUNC O_CREAT )) ) ) {
binmode $fh, ':utf8';
if ( -f $fh || !-e _ ) {
print $fh $$txtref;
}
else {
die "ERROR: Attempting to write to an invalid path: $path";
}
close $fh;
}
else {
die Cpanel::Exception::create( 'IO::FileOpenError', { path => $path, error => $!, mode => '>' } );
}
return 1;
}
sub main {
my %cfg = @_;
# remove from cfg hash to ensure we don't duplicate, and
# possible use the wrong arg
my $in = delete $cfg{in};
my $out = delete $cfg{out};
my $hint = delete $cfg{hint};
%Cfg = %cfg;
my $scl_package = guess_scl_package( $in, $hint );
my $ini = get_converted_php_ini( $in, $scl_package );
write_php_ini( $ini, $out );
return 1;
}
package ea_convert_php_ini_system;
use strict;
use warnings;
use Cwd ();
use Getopt::Long ();
use Cpanel::AccessIds::ReducedPrivileges ();
use Cpanel::ProgLang::Conf ();
use Cpanel::WebServer ();
use Cpanel::WebServer::Userdata ();
use Cpanel::ProgLang ();
use Cpanel::SafeRun::Errors ();
use Cpanel::Config::userdata ();
use Cpanel::Version::Tiny ();
use Cpanel::Version::Compare ();
use File::Basename ();
use Cpanel::Logger ();
our $TMPDIR = '/var/cpanel/tmp';
our $DEFAULT_HANDLER = 'suphp';
our %Cfg;
sub logger {
my $msg = shift;
my %log = (
'message' => $msg,
'level' => 'info',
'output' => $Cfg{verbose} ? 1 : 0,
'service' => 'ea_convert_php_ini',
'backtrace' => 0,
'die' => 0,
);
# use logger() instead of info() so that user can turn verbose on/off
Cpanel::Logger::logger( \%log );
return 1;
}
sub usage {
my $msg = shift;
my $fh = $msg ? \*STDERR : \*STDOUT;
print $fh "$msg\n\n" if $msg;
print $fh "Converts PHP ini files from EA3 to EA4\n";
print $fh "\nUsage: $0 --action <ini|sys> [OPTIONS]\n\n";
print $fh "Required:\n";
#print $fh " --action ini -i <old.ini> -o <new.ini> # Convert a single ini file\n";
print $fh " --action sys # Converts ini files in entire system\n";
print $fh "\n";
print $fh "Optional arguments:\n";
print $fh " -h|--help # Show this help output\n";
print $fh "\n";
#print $fh "Optional --ini arguments:\n";
#print $fh " -t|--hint <php package> # Choose which package to inherit from\n";
#print $fh " -f|--force # Overwrite -o argument if the file exists\n";
#print $fh "\n";
print $fh "Optional --sys arguments:\n";
print $fh " -q|--quiet # Only display warnings/errors\n";
print $fh " -n|--dryrun # Display actions, but don't convert files\n";
print $fh "\n";
print $fh "Example:\n";
#print $fh " $0 -a ini -i php.ini.old -o php.ini -f\n";
print $fh " $0 -a sys -n -q p -u user1 -u user2\n";
exit( $msg ? 1 : 0 );
}
# TODO: Use Params::Validate
sub process_args {
my $argv = shift;
my %opts = (
sys => {
default => {
verbose => 1,
dryrun => 0,
user => [],
hint => undef,
},
opts => {
'q|quiet' => sub { $Cfg{verbose} = 0 },
'n|dryrun' => sub { $Cfg{dryrun} = 1 },
'u|user=s@' => sub { shift; push @{ $Cfg{user} }, shift }, # undocumented/unsupported -- convert specific users on system
't|hint=s' => sub { shift; $Cfg{hint} = shift }, # undocumented/unsupported -- allow conversion to alternate php version
},
required => [],
},
'ini' => {
default => {
force => 0,
in => undef,
out => undef,
hint => undef,
},
opts => {
'f|force' => sub { $Cfg{force} = 1 },
'i|in=s' => sub { shift; $Cfg{in} = shift },
'o|out=s' => sub { shift; $Cfg{out} = shift },
't|hint=s' => sub { shift; $Cfg{hint} = shift }, # undocumented/unsupported -- convert packages using a diff PHP than sys default
},
required => [qw( in out )],
},
);
# determine action type first so that we can validate args based on that action type
my $action;
Getopt::Long::Configure('pass_through');
Getopt::Long::GetOptionsFromArray(
$argv,
'h|help' => sub { usage() },
'a|action=s' => sub { shift; $action = lc shift },
);
usage("ERROR: You must specify a valid action argument") if ( !defined $action || !defined $opts{$action} );
usage("ERROR: Only supports the 'sys' action") if $action ne 'sys'; # hack until this code is updated to support cmd-line execution
# apply default settings so user can override
%Cfg = %{ $opts{$action}->{default} };
# grab action specific options
Getopt::Long::GetOptionsFromArray(
$argv,
%{ $opts{$action}->{opts} },
);
usage("ERROR: The $argv->[0] argument isn't a valid '$action' action") if @$argv; # in case user passes unsupported 'cmd -- args'
# ensure required params are passed in
my %required = map { $_ => 1 } @{ $opts{$action}->{required} };
my @missing = grep { defined $required{$_} && !defined $Cfg{$_} } keys %Cfg;
usage("ERROR: You must pass the --$missing[0] argument for the '$action' action") if @missing;
# get system php version
my $pg = Cpanel::ProgLang::Conf->new( type => 'php' );
$Cfg{state} = $pg->get_conf();
$Cfg{action} = $action;
return 1;
}
sub verbose {
my $msg = shift;
print "$msg\n" if $Cfg{verbose};
return 1;
}
# make it exceedingly not fun to run this via the command-line
sub is_manual {
my $touch = "$TMPDIR/you_take_full_responsibility_do_not_do_this_manually.ea_convert_php_ini";
my $now = time;
my $ctime = ( stat $touch )[10];
return ( defined $ctime && ( $now - $ctime ) < 30 ? 0 : 1 );
}
sub is_root { # so we can mock root check
return ( $> == 0 ? 1 : 0 );
}
# This function ensures conditions 1 and 2 are met as
# defined above (along with being root)
sub sane_or_bail {
die "ERROR: This will only run during EA3 to EA4 migration" if is_manual();
die "ERROR: You must be root to run this" unless is_root();
my $default = $Cfg{state}{default};
# no default php version defined in the configuration file
unless ( defined $default ) {
logger("ERROR: Skipping conversion: The system default PHP version hasn't been configured");
die "ERROR: Skipping conversion: The system default PHP version hasn't been configured";
}
my $handler = $Cfg{state}{$default};
if ( $handler ne $DEFAULT_HANDLER ) {
logger("Skipping conversion: The system default PHP version isn't assigned to the '$handler' instead of $DEFAULT_HANDLER");
die "Skipping conversion: The system default PHP version isn't assigned to the '$handler' instead of $DEFAULT_HANDLER";
}
return 1;
}
sub do_rename {
my ( $old, $new ) = @_;
return ( $Cfg{dryrun} ? 1 : rename( $old, $new ) );
}
sub do_convert {
my ( $old, $new ) = @_;
my $ret;
if ( $Cfg{dryrun} ) {
$ret = 1;
}
else {
my %cfg = ( force => 0, in => $old, out => $new, hint => $Cfg{hint}, state => $Cfg{state} );
eval { ea_convert_php_ini_file::main(%cfg) };
$ret = $@ ? 0 : 1;
}
return $ret;
}
sub convert_ini {
my $user = shift;
my $new = shift;
my $old = "$new.ea3.bak";
my $ret = 1;
if ( -s $new ) {
if ( do_rename( $new, $old ) ) {
local $@;
if ( do_convert( $old, $new ) ) {
logger("[$user] Converted $new for EasyApache 4 compatibility");
}
else {
my $err = "$@" =~ s/^\s*Error:\s*//ir;
warn "\nWARNING: [$user] Failed to convert $new\n$err\n";
do_rename( $old, $new );
$ret = 0;
}
}
else {
warn "WARNING: [$user] Skipping $new -- Unable to backup: $!";
$ret = 0;
}
}
else {
verbose("[$user] Skipping $new -- missing/empty");
}
return $ret;
}
# Retrieve the suphp_configpath directory.
# Apache directive syntax: http://httpd.apache.org/docs/current/configuring.html#syntax
# NOTE: This does not take into account usage of trailing '\' to indicate multiple lines
# NOTE: This assumes there's only a single entry path defined
sub get_suphp_configpath {
my $htaccess = shift;
my $path;
my $basedir = File::Basename::dirname($htaccess);
if ( sysopen( my $fh, $htaccess, Cpanel::Fcntl::or_flags(qw( O_RDONLY )) ) ) {
while ( !$path && ( my $line = <$fh> ) ) {
if ( $line =~ /^\s*suPHP_ConfigPath\s*(\S+)\s*$/i ) {
my $val = "$1";
next if $val =~ /^\s*\\\s*$/; # multi-line not supported
$val =~ s/(?:^['"]+)|(?:['"]*$)//g;
$val =~ s/\/+$//g;
$path = "$val/php.ini";
$path = "$basedir/$path" unless $path =~ /^\//;
}
}
close $fh;
}
return $path;
}
# Verifies that a file is within a given directory
sub is_within {
my ( $path, $basedir ) = @_;
$basedir =~ s/\/+$//g;
my $subdir = substr( $path, 0, length($basedir) + 1 ); # grab trailing slash in $path
return ( $subdir eq "$basedir/" ? 1 : 0 );
}
# Performs some sanity checks/verification on the path specified within
# an .htaccess file.
#
# Expectation: $fullpath is a full path (dirs and all) that points to a file
sub get_safe_path {
my ( $fullpath, $homedir ) = @_;
my $safe;
if ( -f $fullpath ) {
my $dir = File::Basename::dirname($fullpath);
my $cwd = Cwd::getcwd;
if ( chdir $dir ) { # so abs_path uses correct basedir
my $ln = readlink($fullpath);
my $actual = Cwd::abs_path( $ln || $fullpath );
$safe = $actual if ( $actual && is_within( $actual, $homedir ) ); # don't set $safe if circular symlink
chdir $cwd or die Cpanel::Exception::create( 'IO::ChdirError', { path => $cwd, error => $! } );
}
}
return $safe;
}
sub convert_user {
my $user = shift;
my $php = Cpanel::ProgLang->new( type => 'php' );
my $ws = Cpanel::WebServer->new();
my $aref = $ws->get_vhost_lang_packages( lang => $php, user => $user );
my %seen; # prevent converting the same file repeatedly (e.g. symlinks to same file)
my $count = 0;
if ( !@$aref || !$aref->[0]->{homedir} ) {
warn "WARNING: [$user] Skipping -- The home directory isn't configured in cPanel";
return -1;
}
# first update the php.ini file sitting in the user's home directory (if any)
my $homedir = $aref->[0]->{homedir};
my $path = get_suphp_configpath("$homedir/.htaccess");
if ($path) {
my $safe = get_safe_path( $path, $homedir );
if ($safe) {
$seen{$safe} = 1;
$count++ if convert_ini( $user, $safe );
}
else {
verbose("[$user] Skipping home directory -- suPHP_ConfigPath setting doesn't exist or is outside of home directory");
}
}
else {
verbose("[$user] Skipping home directory -- The suPHP_ConfigPath directive is not defined in an .htaccess file");
}
# now perform this same work on each php.ini file within the docroot of the domains
for my $rec (@$aref) {
my $docroot = $rec->{documentroot};
unless ($docroot) {
warn "WARNING: [$user] Skipping $rec->{vhost}, document root undefined";
next;
}
# if the .htaccess file in home directory is convertible, then
# all of the documentroots under the home directory are also
# convertible.
$path = get_suphp_configpath("$docroot/.htaccess");
if ($path) {
my $safe = get_safe_path( $path, $homedir );
if ($safe) {
if ( defined $seen{$path} ) {
verbose("[$user] Skipping $rec->{vhost} -- Found duplicate ini file");
}
else {
$seen{$path} = 1;
$count++ if convert_ini( $user, $path );
}
}
else {
verbose("[$user] Skipping $rec->{vhost} -- suPHP_ConfigPath setting does not exist or is outside of home directory");
}
}
else {
verbose("[$user] Skipping $rec->{vhost} -- The suPHP_ConfigPath directive is not defined in an .htaccess file");
}
}
return $count;
}
# Intent: only convert suphp configured ini files
sub convert_system {
unlink "$TMPDIR/you_take_full_responsibility_do_not_do_this_manually.ea_convert_php_ini";
my $aref = Cpanel::Config::userdata::load_user_list();
my $cnt = $#{ $Cfg{user} } + 1; # micro optimization
my %lu = map { $_ => 1 } @{ $Cfg{user} }; # micro optimization
for my $user (@$aref) {
next if ( $user eq 'nobody' or $user eq 'root' );
next if ( $cnt > 0 && !defined $lu{$user} ); # ~3-5% faster with 10k hosts
my $ud = Cpanel::WebServer::Userdata->new( user => $user );
my $sub = sub { return convert_user($user) };
Cpanel::AccessIds::ReducedPrivileges::call_as_user( $sub, $ud->id() );
}
return 1;
}
sub main {
my $argv = shift;
# Tree::DAG_Node wasn't introduced until 11.56
if ( Cpanel::Version::Compare::compare( $Cpanel::Version::Tiny::VERSION, '<', '11.56' ) ) {
warn "ERROR: You should only run this on cPanel & WHM version 11.56 and newer";
exit 1;
}
logger("Beginning EA3 to EA4 php ini conversion");
process_args($argv);
sane_or_bail();
convert_system();
logger("Completed EA3 to EA4 php ini conversion");
exit 0;
}
package main;
use strict;
use warnings;
ea_convert_php_ini_system::main( \@ARGV ) unless caller();
1;
__END__