????
Your IP : 3.133.158.116
<?php
// phpcs:ignoreFile
/**
* @file
* Drupal site-specific configuration file.
*
* IMPORTANT NOTE:
* This file may have been set to read-only by the Drupal installation program.
* If you make changes to this file, be sure to protect it again after making
* your modifications. Failure to remove write permissions to this file is a
* security risk.
*
* In order to use the selection rules below the multisite aliasing file named
* sites/sites.php must be present. Its optional settings will be loaded, and
* the aliases in the array $sites will override the default directory rules
* below. See sites/example.sites.php for more information about aliases.
*
* The configuration directory will be discovered by stripping the website's
* hostname from left to right and pathname from right to left. The first
* configuration file found will be used and any others will be ignored. If no
* other configuration file is found then the default configuration file at
* 'sites/default' will be used.
*
* For example, for a fictitious site installed at
* https://www.drupal.org:8080/my-site/test/, the 'settings.php' file is searched
* for in the following directories:
*
* - sites/8080.www.drupal.org.my-site.test
* - sites/www.drupal.org.my-site.test
* - sites/drupal.org.my-site.test
* - sites/org.my-site.test
*
* - sites/8080.www.drupal.org.my-site
* - sites/www.drupal.org.my-site
* - sites/drupal.org.my-site
* - sites/org.my-site
*
* - sites/8080.www.drupal.org
* - sites/www.drupal.org
* - sites/drupal.org
* - sites/org
*
* - sites/default
*
* Note that if you are installing on a non-standard port number, prefix the
* hostname with that number. For example,
* https://www.drupal.org:8080/my-site/test/ could be loaded from
* sites/8080.www.drupal.org.my-site.test/.
*
* @see example.sites.php
* @see \Drupal\Core\DrupalKernel::getSitePath()
*
* In addition to customizing application settings through variables in
* settings.php, you can create a services.yml file in the same directory to
* register custom, site-specific service definitions and/or swap out default
* implementations with custom ones.
*/
/**
* Database settings:
*
* The $databases array specifies the database connection or
* connections that Drupal may use. Drupal is able to connect
* to multiple databases, including multiple types of databases,
* during the same request.
*
* One example of the simplest connection array is shown below. To use the
* sample settings, copy and uncomment the code below between the @code and
* @endcode lines and paste it after the $databases declaration. You will need
* to replace the database username and password and possibly the host and port
* with the appropriate credentials for your database system.
*
* The next section describes how to customize the $databases array for more
* specific needs.
*
* @code
* $databases['default']['default'] = [
* 'database' => 'database_name',
* 'username' => 'sql_username',
* 'password' => 'sql_password',
* 'host' => 'localhost',
* 'port' => '3306',
* 'driver' => 'mysql',
* 'prefix' => '',
* 'collation' => 'utf8mb4_general_ci',
* ];
* @endcode
*/
$databases = [];
/**
* Customizing database settings.
*
* Many of the values of the $databases array can be customized for your
* particular database system. Refer to the sample in the section above as a
* starting point.
*
* The "driver" property indicates what Drupal database driver the
* connection should use. This is usually the same as the name of the
* database type, such as mysql or sqlite, but not always. The other
* properties will vary depending on the driver. For SQLite, you must
* specify a database file name in a directory that is writable by the
* webserver. For most other drivers, you must specify a
* username, password, host, and database name.
*
* Drupal core implements drivers for mysql, pgsql, and sqlite. Other drivers
* can be provided by contributed or custom modules. To use a contributed or
* custom driver, the "namespace" property must be set to the namespace of the
* driver. The code in this namespace must be autoloadable prior to connecting
* to the database, and therefore, prior to when module root namespaces are
* added to the autoloader. To add the driver's namespace to the autoloader,
* set the "autoload" property to the PSR-4 base directory of the driver's
* namespace. This is optional for projects managed with Composer if the
* driver's namespace is in Composer's autoloader.
*
* For each database, you may optionally specify multiple "target" databases.
* A target database allows Drupal to try to send certain queries to a
* different database if it can but fall back to the default connection if not.
* That is useful for primary/replica replication, as Drupal may try to connect
* to a replica server when appropriate and if one is not available will simply
* fall back to the single primary server (The terms primary/replica are
* traditionally referred to as master/slave in database server documentation).
*
* The general format for the $databases array is as follows:
* @code
* $databases['default']['default'] = $info_array;
* $databases['default']['replica'][] = $info_array;
* $databases['default']['replica'][] = $info_array;
* $databases['extra']['default'] = $info_array;
* @endcode
*
* In the above example, $info_array is an array of settings described above.
* The first line sets a "default" database that has one primary database
* (the second level default). The second and third lines create an array
* of potential replica databases. Drupal will select one at random for a given
* request as needed. The fourth line creates a new database with a name of
* "extra".
*
* For MySQL, MariaDB or equivalent databases the 'isolation_level' option can
* be set. The recommended transaction isolation level for Drupal sites is
* 'READ COMMITTED'. The 'REPEATABLE READ' option is supported but can result
* in deadlocks, the other two options are 'READ UNCOMMITTED' and 'SERIALIZABLE'.
* They are available but not supported; use them at your own risk. For more
* info:
* https://dev.mysql.com/doc/refman/8.0/en/innodb-transaction-isolation-levels.html
*
* On your settings.php, change the isolation level:
* @code
* $databases['default']['default']['init_commands'] = [
* 'isolation_level' => 'SET SESSION TRANSACTION ISOLATION LEVEL READ COMMITTED',
* ];
* @endcode
*
* You can optionally set a prefix for all database table names by using the
* 'prefix' setting. If a prefix is specified, the table name will be prepended
* with its value. Be sure to use valid database characters only, usually
* alphanumeric and underscore. If no prefix is desired, do not set the 'prefix'
* key or set its value to an empty string ''.
*
* For example, to have all database table prefixed with 'main_', set:
* @code
* 'prefix' => 'main_',
* @endcode
*
* Advanced users can add or override initial commands to execute when
* connecting to the database server, as well as PDO connection settings. For
* example, to enable MySQL SELECT queries to exceed the max_join_size system
* variable, and to reduce the database connection timeout to 5 seconds:
* @code
* $databases['default']['default'] = [
* 'init_commands' => [
* 'big_selects' => 'SET SQL_BIG_SELECTS=1',
* ],
* 'pdo' => [
* PDO::ATTR_TIMEOUT => 5,
* ],
* ];
* @endcode
*
* WARNING: The above defaults are designed for database portability. Changing
* them may cause unexpected behavior, including potential data loss. See
* https://www.drupal.org/docs/8/api/database-api/database-configuration for
* more information on these defaults and the potential issues.
*
* More details can be found in the constructor methods for each driver:
* - \Drupal\mysql\Driver\Database\mysql\Connection::__construct()
* - \Drupal\pgsql\Driver\Database\pgsql\Connection::__construct()
* - \Drupal\sqlite\Driver\Database\sqlite\Connection::__construct()
*
* Sample Database configuration format for PostgreSQL (pgsql):
* @code
* $databases['default']['default'] = [
* 'driver' => 'pgsql',
* 'database' => 'database_name',
* 'username' => 'sql_username',
* 'password' => 'sql_password',
* 'host' => 'localhost',
* 'prefix' => '',
* ];
* @endcode
*
* Sample Database configuration format for SQLite (sqlite):
* @code
* $databases['default']['default'] = [
* 'driver' => 'sqlite',
* 'database' => '/path/to/database_filename',
* ];
* @endcode
*
* Sample Database configuration format for a driver in a contributed module:
* @code
* $databases['default']['default'] = [
* 'driver' => 'my_driver',
* 'namespace' => 'Drupal\my_module\Driver\Database\my_driver',
* 'autoload' => 'modules/my_module/src/Driver/Database/my_driver/',
* 'database' => 'database_name',
* 'username' => 'sql_username',
* 'password' => 'sql_password',
* 'host' => 'localhost',
* 'prefix' => '',
* ];
* @endcode
*
* Sample Database configuration format for a driver that is extending another
* database driver.
* @code
* $databases['default']['default'] = [
* 'driver' => 'my_driver',
* 'namespace' => 'Drupal\my_module\Driver\Database\my_driver',
* 'autoload' => 'modules/my_module/src/Driver/Database/my_driver/',
* 'database' => 'database_name',
* 'username' => 'sql_username',
* 'password' => 'sql_password',
* 'host' => 'localhost',
* 'prefix' => '',
* 'dependencies' => [
* 'parent_module' => [
* 'namespace' => 'Drupal\parent_module',
* 'autoload' => 'core/modules/parent_module/src/',
* ],
* ],
* ];
* @endcode
*/
/**
* Location of the site configuration files.
*
* The $settings['config_sync_directory'] specifies the location of file system
* directory used for syncing configuration data. On install, the directory is
* created. This is used for configuration imports.
*
* The default location for this directory is inside a randomly-named
* directory in the public files path. The setting below allows you to set
* its location.
*/
# $settings['config_sync_directory'] = '/directory/outside/webroot';
/**
* Settings:
*
* $settings contains environment-specific configuration, such as the files
* directory and reverse proxy address, and temporary configuration, such as
* security overrides.
*
* @see \Drupal\Core\Site\Settings::get()
*/
/**
* Salt for one-time login links, cancel links, form tokens, etc.
*
* This variable will be set to a random value by the installer. All one-time
* login links will be invalidated if the value is changed. Note that if your
* site is deployed on a cluster of web servers, you must ensure that this
* variable has the same value on each server.
*
* For enhanced security, you may set this variable to the contents of a file
* outside your document root, and vary the value across environments (like
* production and development); you should also ensure that this file is not
* stored with backups of your database.
*
* Example:
* @code
* $settings['hash_salt'] = file_get_contents('/home/example/salt.txt');
* @endcode
*/
$settings['hash_salt'] = '[[hash_salt]]';
/**
* Deployment identifier.
*
* Drupal's dependency injection container will be automatically invalidated and
* rebuilt when the Drupal core version changes. When updating contributed or
* custom code that changes the container, changing this identifier will also
* allow the container to be invalidated as soon as code is deployed.
*/
# $settings['deployment_identifier'] = \Drupal::VERSION;
/**
* Access control for update.php script.
*
* If you are updating your Drupal installation using the update.php script but
* are not logged in using either an account with the "Administer software
* updates" permission or the site maintenance account (the account that was
* created during installation), you will need to modify the access check
* statement below. Change the FALSE to a TRUE to disable the access check.
* After finishing the upgrade, be sure to open this file again and change the
* TRUE back to a FALSE!
*/
$settings['update_free_access'] = FALSE;
/**
* Fallback to HTTP for Update Manager and for fetching security advisories.
*
* If your site fails to connect to updates.drupal.org over HTTPS (either when
* fetching data on available updates, or when fetching the feed of critical
* security announcements), you may uncomment this setting and set it to TRUE to
* allow an insecure fallback to HTTP. Note that doing so will open your site up
* to a potential man-in-the-middle attack. You should instead attempt to
* resolve the issues before enabling this option.
* @see https://www.drupal.org/docs/system-requirements/php-requirements#openssl
* @see https://en.wikipedia.org/wiki/Man-in-the-middle_attack
* @see \Drupal\update\UpdateFetcher
* @see \Drupal\system\SecurityAdvisories\SecurityAdvisoriesFetcher
*/
# $settings['update_fetch_with_http_fallback'] = TRUE;
/**
* External access proxy settings:
*
* If your site must access the Internet via a web proxy then you can enter the
* proxy settings here. Set the full URL of the proxy, including the port, in
* variables:
* - $settings['http_client_config']['proxy']['http']: The proxy URL for HTTP
* requests.
* - $settings['http_client_config']['proxy']['https']: The proxy URL for HTTPS
* requests.
* You can pass in the user name and password for basic authentication in the
* URLs in these settings.
*
* You can also define an array of host names that can be accessed directly,
* bypassing the proxy, in $settings['http_client_config']['proxy']['no'].
*/
# $settings['http_client_config']['proxy']['http'] = 'http://proxy_user:proxy_pass@example.com:8080';
# $settings['http_client_config']['proxy']['https'] = 'http://proxy_user:proxy_pass@example.com:8080';
# $settings['http_client_config']['proxy']['no'] = ['127.0.0.1', 'localhost'];
/**
* Reverse Proxy Configuration:
*
* Reverse proxy servers are often used to enhance the performance
* of heavily visited sites and may also provide other site caching,
* security, or encryption benefits. In an environment where Drupal
* is behind a reverse proxy, the real IP address of the client should
* be determined such that the correct client IP address is available
* to Drupal's logging and access management systems. In the most simple
* scenario, the proxy server will add an X-Forwarded-For header to the request
* that contains the client IP address. However, HTTP headers are vulnerable to
* spoofing, where a malicious client could bypass restrictions by setting the
* X-Forwarded-For header directly. Therefore, Drupal's proxy configuration
* requires the IP addresses of all remote proxies to be specified in
* $settings['reverse_proxy_addresses'] to work correctly.
*
* Enable this setting to get Drupal to determine the client IP from the
* X-Forwarded-For header. If you are unsure about this setting, do not have a
* reverse proxy, or Drupal operates in a shared hosting environment, this
* setting should remain commented out.
*
* In order for this setting to be used you must specify every possible
* reverse proxy IP address in $settings['reverse_proxy_addresses'].
* If a complete list of reverse proxies is not available in your
* environment (for example, if you use a CDN) you may set the
* $_SERVER['REMOTE_ADDR'] variable directly in settings.php.
* Be aware, however, that it is likely that this would allow IP
* address spoofing unless more advanced precautions are taken.
*/
# $settings['reverse_proxy'] = TRUE;
/**
* Reverse proxy addresses.
*
* Specify every reverse proxy IP address in your environment, as an array of
* IPv4/IPv6 addresses or subnets in CIDR notation. This setting is required if
* $settings['reverse_proxy'] is TRUE.
*/
# $settings['reverse_proxy_addresses'] = ['a.b.c.d', 'e.f.g.h/24', ...];
/**
* Reverse proxy trusted headers.
*
* Sets which headers to trust from your reverse proxy.
*
* Common values are:
* - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR
* - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST
* - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT
* - \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO
* - \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
*
* Note the default value of
* @code
* \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
* @endcode
* is not secure by default. The value should be set to only the specific
* headers the reverse proxy uses. For example:
* @code
* \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO
* @endcode
* This would trust the following headers:
* - X_FORWARDED_FOR
* - X_FORWARDED_HOST
* - X_FORWARDED_PROTO
* - X_FORWARDED_PORT
*
* @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR
* @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST
* @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT
* @see \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO
* @see \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED
* @see \Symfony\Component\HttpFoundation\Request::setTrustedProxies
*/
# $settings['reverse_proxy_trusted_headers'] = \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_FOR | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_HOST | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PORT | \Symfony\Component\HttpFoundation\Request::HEADER_X_FORWARDED_PROTO | \Symfony\Component\HttpFoundation\Request::HEADER_FORWARDED;
/**
* Page caching:
*
* By default, Drupal sends a "Vary: Cookie" HTTP header for anonymous page
* views. This tells a HTTP proxy that it may return a page from its local
* cache without contacting the web server, if the user sends the same Cookie
* header as the user who originally requested the cached page. Without "Vary:
* Cookie", authenticated users would also be served the anonymous page from
* the cache. If the site has mostly anonymous users except a few known
* editors/administrators, the Vary header can be omitted. This allows for
* better caching in HTTP proxies (including reverse proxies), i.e. even if
* clients send different cookies, they still get content served from the cache.
* However, authenticated users should access the site directly (i.e. not use an
* HTTP proxy, and bypass the reverse proxy if one is used) in order to avoid
* getting cached pages from the proxy.
*/
# $settings['omit_vary_cookie'] = TRUE;
/**
* Cache TTL for client error (4xx) responses.
*
* Items cached per-URL tend to result in a large number of cache items, and
* this can be problematic on 404 pages which by their nature are unbounded. A
* fixed TTL can be set for these items, defaulting to one hour, so that cache
* backends which do not support LRU can purge older entries. To disable caching
* of client error responses set the value to 0. Currently applies only to
* page_cache module.
*/
# $settings['cache_ttl_4xx'] = 3600;
/**
* Expiration of cached forms.
*
* Drupal's Form API stores details of forms in a cache and these entries are
* kept for at least 6 hours by default. Expired entries are cleared by cron.
*
* @see \Drupal\Core\Form\FormCache::setCache()
*/
# $settings['form_cache_expiration'] = 21600;
/**
* Class Loader.
*
* If the APCu extension is detected, the classloader will be optimized to use
* it. Set to FALSE to disable this.
*
* @see https://getcomposer.org/doc/articles/autoloader-optimization.md
*/
# $settings['class_loader_auto_detect'] = FALSE;
/**
* Authorized file system operations:
*
* The Update Manager module included with Drupal provides a mechanism for
* site administrators to securely install missing updates for the site
* directly through the web user interface. On securely-configured servers,
* the Update manager will require the administrator to provide SSH or FTP
* credentials before allowing the installation to proceed; this allows the
* site to update the new files as the user who owns all the Drupal files,
* instead of as the user the webserver is running as. On servers where the
* webserver user is itself the owner of the Drupal files, the administrator
* will not be prompted for SSH or FTP credentials (note that these server
* setups are common on shared hosting, but are inherently insecure).
*
* Some sites might wish to disable the above functionality, and only update
* the code directly via SSH or FTP themselves. This setting completely
* disables all functionality related to these authorized file operations.
*
* @see https://www.drupal.org/node/244924
*
* Remove the leading hash signs to disable.
*/
# $settings['allow_authorize_operations'] = FALSE;
/**
* Default mode for directories and files written by Drupal.
*
* Value should be in PHP Octal Notation, with leading zero.
*/
# $settings['file_chmod_directory'] = 0775;
# $settings['file_chmod_file'] = 0664;
/**
* Optimized assets path:
*
* A local file system path where optimized assets will be stored. This directory
* must exist and be writable by Drupal. This directory must be relative to
* the Drupal installation directory and be accessible over the web.
*/
# $settings['file_assets_path'] = 'sites/default/files';
/**
* Public file base URL:
*
* An alternative base URL to be used for serving public files. This must
* include any leading directory path.
*
* A different value from the domain used by Drupal to be used for accessing
* public files. This can be used for a simple CDN integration, or to improve
* security by serving user-uploaded files from a different domain or subdomain
* pointing to the same server. Do not include a trailing slash.
*/
# $settings['file_public_base_url'] = 'http://downloads.example.com/files';
/**
* Public file path:
*
* A local file system path where public files will be stored. This directory
* must exist and be writable by Drupal. This directory must be relative to
* the Drupal installation directory and be accessible over the web.
*/
# $settings['file_public_path'] = 'sites/default/files';
/**
* Additional public file schemes:
*
* Public schemes are URI schemes that allow download access to all users for
* all files within that scheme.
*
* The "public" scheme is always public, and the "private" scheme is always
* private, but other schemes, such as "https", "s3", "example", or others,
* can be either public or private depending on the site. By default, they're
* private, and access to individual files is controlled via
* hook_file_download().
*
* Typically, if a scheme should be public, a module makes it public by
* implementing hook_file_download(), and granting access to all users for all
* files. This could be either the same module that provides the stream wrapper
* for the scheme, or a different module that decides to make the scheme
* public. However, in cases where a site needs to make a scheme public, but
* is unable to add code in a module to do so, the scheme may be added to this
* variable, the result of which is that system_file_download() grants public
* access to all files within that scheme.
*/
# $settings['file_additional_public_schemes'] = ['example'];
/**
* File schemes whose paths should not be normalized:
*
* Normally, Drupal normalizes '/./' and '/../' segments in file URIs in order
* to prevent unintended file access. For example, 'private://css/../image.png'
* is normalized to 'private://image.png' before checking access to the file.
*
* On Windows, Drupal also replaces '\' with '/' in URIs for the local
* filesystem.
*
* If file URIs with one or more scheme should not be normalized like this, then
* list the schemes here. For example, if 'porcelain://china/./plate.png' should
* not be normalized to 'porcelain://china/plate.png', then add 'porcelain' to
* this array. In this case, make sure that the module providing the 'porcelain'
* scheme does not allow unintended file access when using '/../' to move up the
* directory tree.
*/
# $settings['file_sa_core_2023_005_schemes'] = ['porcelain'];
/**
* Configuration for phpinfo() admin status report.
*
* Drupal's admin UI includes a report at admin/reports/status/php which shows
* the output of phpinfo(). The full output can contain sensitive information
* so by default Drupal removes some sections.
*
* This behavior can be configured by setting this variable to a different
* value corresponding to the flags parameter of phpinfo().
*
* If you need to expose more information in the report - for example to debug a
* problem - consider doing so temporarily.
*
* @see https://www.php.net/manual/function.phpinfo.php
*/
# $settings['sa_core_2023_004_phpinfo_flags'] = ~ (INFO_VARIABLES | INFO_ENVIRONMENT);
/**
* Private file path:
*
* A local file system path where private files will be stored. This directory
* must be absolute, outside of the Drupal installation directory and not
* accessible over the web.
*
* Note: Caches need to be cleared when this value is changed to make the
* private:// stream wrapper available to the system.
*
* See https://www.drupal.org/documentation/modules/file for more information
* about securing private files.
*/
# $settings['file_private_path'] = '';
/**
* Temporary file path:
*
* A local file system path where temporary files will be stored. This directory
* must be absolute, outside of the Drupal installation directory and not
* accessible over the web.
*
* If this is not set, the default for the operating system will be used.
*
* @see \Drupal\Component\FileSystem\FileSystem::getOsTemporaryDirectory()
*/
# $settings['file_temp_path'] = '/tmp';
/**
* Session write interval:
*
* Set the minimum interval between each session write to database.
* For performance reasons it defaults to 180.
*/
# $settings['session_write_interval'] = 180;
/**
* String overrides:
*
* To override specific strings on your site with or without enabling the Locale
* module, add an entry to this list. This functionality allows you to change
* a small number of your site's default English language interface strings.
*
* Remove the leading hash signs to enable.
*
* The "en" part of the variable name, is dynamic and can be any langcode of
* any added language. (eg locale_custom_strings_de for german).
*/
# $settings['locale_custom_strings_en'][''] = [
# 'Home' => 'Front page',
# '@count min' => '@count minutes',
# ];
/**
* A custom theme for the offline page:
*
* This applies when the site is explicitly set to maintenance mode through the
* administration page or when the database is inactive due to an error.
* The template file should also be copied into the theme. It is located inside
* 'core/modules/system/templates/maintenance-page.html.twig'.
*
* Note: This setting does not apply to installation and update pages.
*/
# $settings['maintenance_theme'] = 'claro';
/**
* PHP settings:
*
* To see what PHP settings are possible, including whether they can be set at
* runtime (by using ini_set()), read the PHP documentation:
* http://php.net/manual/ini.list.php
* See \Drupal\Core\DrupalKernel::bootEnvironment() for required runtime
* settings and the .htaccess file for non-runtime settings.
* Settings defined there should not be duplicated here so as to avoid conflict
* issues.
*/
/**
* If you encounter a situation where users post a large amount of text, and
* the result is stripped out upon viewing but can still be edited, Drupal's
* output filter may not have sufficient memory to process it. If you
* experience this issue, you may wish to uncomment the following two lines
* and increase the limits of these variables. For more information, see
* http://php.net/manual/pcre.configuration.php.
*/
# ini_set('pcre.backtrack_limit', 200000);
# ini_set('pcre.recursion_limit', 200000);
/**
* Configuration overrides.
*
* To globally override specific configuration values for this site,
* set them here. You usually don't need to use this feature. This is
* useful in a configuration file for a vhost or directory, rather than
* the default settings.php.
*
* Note that any values you provide in these variable overrides will not be
* viewable from the Drupal administration interface. The administration
* interface displays the values stored in configuration so that you can stage
* changes to other environments that don't have the overrides.
*
* There are particular configuration values that are risky to override. For
* example, overriding the list of installed modules in 'core.extension' is not
* supported as module install or uninstall has not occurred. Other examples
* include field storage configuration, because it has effects on database
* structure, and 'core.menu.static_menu_link_overrides' since this is cached in
* a way that is not config override aware. Also, note that changing
* configuration values in settings.php will not fire any of the configuration
* change events.
*/
# $config['system.site']['name'] = 'My Drupal site';
# $config['user.settings']['anonymous'] = 'Visitor';
/**
* Load services definition file.
*/
$settings['container_yamls'][] = $app_root . '/' . $site_path . '/services.yml';
/**
* Override the default service container class.
*
* This is useful for example to trace the service container for performance
* tracking purposes, for testing a service container with an error condition or
* to test a service container that throws an exception.
*/
# $settings['container_base_class'] = '\Drupal\Core\DependencyInjection\Container';
/**
* Trusted host configuration.
*
* Drupal core can use the Symfony trusted host mechanism to prevent HTTP Host
* header spoofing.
*
* To enable the trusted host mechanism, you enable your allowable hosts
* in $settings['trusted_host_patterns']. This should be an array of regular
* expression patterns, without delimiters, representing the hosts you would
* like to allow.
*
* For example:
* @code
* $settings['trusted_host_patterns'] = [
* '^www\.example\.com$',
* ];
* @endcode
* will allow the site to only run from www.example.com.
*
* If you are running multisite, or if you are running your site from
* different domain names (eg, you don't redirect http://www.example.com to
* http://example.com), you should specify all of the host patterns that are
* allowed by your site.
*
* For example:
* @code
* $settings['trusted_host_patterns'] = [
* '^example\.com$',
* '^.+\.example\.com$',
* '^example\.org$',
* '^.+\.example\.org$',
* ];
* @endcode
* will allow the site to run off of all variants of example.com and
* example.org, with all subdomains included.
*
* @see https://www.drupal.org/docs/installing-drupal/trusted-host-settings
*/
# $settings['trusted_host_patterns'] = [];
/**
* The default list of directories that will be ignored by Drupal's file API.
*
* By default ignore node_modules and bower_components folders to avoid issues
* with common frontend tools and recursive scanning of directories looking for
* extensions.
*
* @see \Drupal\Core\File\FileSystemInterface::scanDirectory()
* @see \Drupal\Core\Extension\ExtensionDiscovery::scanDirectory()
*/
$settings['file_scan_ignore_directories'] = [
'node_modules',
'bower_components',
];
/**
* The default number of entities to update in a batch process.
*
* This is used by update and post-update functions that need to go through and
* change all the entities on a site, so it is useful to increase this number
* if your hosting configuration (i.e. RAM allocation, CPU speed) allows for a
* larger number of entities to be processed in a single batch run.
*/
$settings['entity_update_batch_size'] = 50;
/**
* Entity update backup.
*
* This is used to inform the entity storage handler that the backup tables as
* well as the original entity type and field storage definitions should be
* retained after a successful entity update process.
*/
$settings['entity_update_backup'] = TRUE;
/**
* Node migration type.
*
* This is used to force the migration system to use the classic node migrations
* instead of the default complete node migrations. The migration system will
* use the classic node migration only if there are existing migrate_map tables
* for the classic node migrations and they contain data. These tables may not
* exist if you are developing custom migrations and do not want to use the
* complete node migrations. Set this to TRUE to force the use of the classic
* node migrations.
*/
$settings['migrate_node_migrate_type_classic'] = FALSE;
/**
* The default settings for migration sources.
*
* These settings are used as the default settings on the Credential form at
* /upgrade/credentials.
*
* - migrate_source_version - The version of the source database. This can be
* '6' or '7'. Defaults to '7'.
* - migrate_source_connection - The key in the $databases array for the source
* site.
* - migrate_file_public_path - The location of the source Drupal 6 or Drupal 7
* public files. This can be a local file directory containing the source
* Drupal 6 or Drupal 7 site (e.g /var/www/docroot), or the site address
* (e.g http://example.com).
* - migrate_file_private_path - The location of the source Drupal 7 private
* files. This can be a local file directory containing the source Drupal 7
* site (e.g /var/www/docroot), or empty to use the same value as Public
* files directory.
*
* Sample configuration for a drupal 6 source site with the source files in a
* local directory.
*
* @code
* $settings['migrate_source_version'] = '6';
* $settings['migrate_source_connection'] = 'migrate';
* $settings['migrate_file_public_path'] = '/var/www/drupal6';
* @endcode
*
* Sample configuration for a drupal 7 source site with public source files on
* the source site and the private files in a local directory.
*
* @code
* $settings['migrate_source_version'] = '7';
* $settings['migrate_source_connection'] = 'migrate';
* $settings['migrate_file_public_path'] = 'https://drupal7.com';
* $settings['migrate_file_private_path'] = '/var/www/drupal7';
* @endcode
*/
# $settings['migrate_source_connection'] = '';
# $settings['migrate_source_version'] = '';
# $settings['migrate_file_public_path'] = '';
# $settings['migrate_file_private_path'] = '';
/**
* Load local development override configuration, if available.
*
* Create a settings.local.php file to override variables on secondary (staging,
* development, etc.) installations of this site.
*
* Typical uses of settings.local.php include:
* - Disabling caching.
* - Disabling JavaScript/CSS compression.
* - Rerouting outgoing emails.
*
* Keep this code block at the end of this file to take full effect.
*/
#
# if (file_exists($app_root . '/' . $site_path . '/settings.local.php')) {
# include $app_root . '/' . $site_path . '/settings.local.php';
# }
$databases['default']['default'] = array (
'database' => '[[softdb]]',
'username' => '[[softdbuser]]',
'password' => '[[softdbpass]]',
'prefix' => '[[dbprefix]]',
'host' => '[[softdbhost]]',
'port' => '3306',
'isolation_level' => '',
'driver' => 'mysql',
'namespace' => 'Drupal\\mysql\\Driver\\Database\\mysql',
'autoload' => 'core/modules/mysql/src/Driver/Database/mysql/',
);
$settings['config_sync_directory'] = '[[config_directories]]';